Pneumatic FESTO Price List

Stroke52 mm
Piston diameter50 mm
CushioningElastic cushioning rings/plates at both ends Self-adjusting pneumatic end-position cushioning
Mounting positionoptional
Conforms to standardISO 21287
DesignPiston Piston rod Profile barrel
Position detectionVia proximity switch
VariantsEX protection approval (ATEX) Metals with copper, zinc or nickel by mass as main constituent are excluded from use. Exceptions are nickel in steel, chemically nickel-plated surfaces, printed circuit boards, cables, electrical plug connectors and coils. Improved running performance Extended male piston rod thread Custom thread on the piston rod Extended piston rod With protection against rotation High corrosion protection Dust protection Uniform, slow movement Low friction Through piston rod Through, hollow piston rod Heat-resistant seals max. 120°C Laser etched rating plate Temperature range -40 to 80°C Piston rod at one end
Operating pressure0.06 MPa ... 1 MPa
Operating pressure0.6 bar ... 10 bar
Mode of operationDouble-acting
CE mark (see declaration of conformity)To EU Explosion Protection Directive (ATEX)
UKCA marking (see declaration of conformity)To UK EX instructions
Explosion protection certification outside the EUEPL Db (GB) EPL Gb (GB)
Explosion protectionZone 1 (ATEX) Zone 1 (UKEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 21 (UKEX) Zone 22 (ATEX)
ATEX category gasII 2G
ATEX category dustII 2D
Explosion ignition protection type for gasEx h IIC T4 Gb
Explosion ignition protection type for dustEx h IIIC T120°C Db
Explosion ambient temperature-20°C <= Ta <= +60°C
Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will always be required)
Corrosion resistance class CRC0 - No corrosion stress 2 - Moderate corrosion stress 3 - high corrosion stress
LABS (PWIS) conformityVDMA24364-B1/B2-L VDMA24364 zone III
Suitability for the production of Li-ion batteriesSuitable for battery production according to the Festo internal definition of the degree of severity F1A with restrictions regarding the use of Cu/Zn/Ni
Ambient temperature-40 °C ... 120 °C
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke1057 N
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke1057 N ... 1178 N
Additional weight per piston rod extension of 10 mm16 g
Additional weight per piston rod thread extension of 10 mm9 g
Type of mountingEither: With through-hole Via female thread With accessories
Pneumatic connectionG1/8
Note on materialsRoHS-compliant
Material collar screwsSteel
Material coverAnodised wrought aluminium alloy
Material piston rodHigh-alloy steel
Material cylinder barrelSmooth-anodised wrought aluminium alloy